Kara LED Mirror with Bluetooth & Demister

Copper-free mirror
LED lighting with adjustable colour temperature (2700K - 6500K)
Demister with 1-hour auto cut-off
Touch sensor
Acrylic frame
Portrait or landscape

5 Year Replacement Warranty

All Remer LED products must be installed by a licensed
electrician in accordance with local regulations.

If any modification is made, it will invalidate the warranty and may render the product unsafe. This product is IP44 rated and suitable for installation in Zones 2 and outisde Zon according to the IEEE regulations. It is not suitable for use in saunas, steam rooms and shower cubicles. Appropriate circuit protection should be available for the products. Take suitable precautions when handling products. Do not install and/or use if product is broken or unsafe. This product is design for installation into a drywall, if mounting onto other substrate ensure appropriate fixing and batons (if required) are used and the load bearing of the wall is sufficient.
Always switch off the electrical supply to the product at the mains during installation and maintenance.
It is recommended that this product is installed by two people.

Do not leave the mirror on for prolonged period.

Mirror and Shaving Cabinet:
Please clean mirror surface with a mixture of 30% isopropyl alcohol and 70% water and use a soft micro-fibre cloth/chamois.
Dry off the mirror edges.
Wipe off all water spillages immediately.

Concrete and Aluminium Frames:
Please use a soft micro-fibre cloth/chamois and warm water

*Do not use any abrasives, acidic or alkaline based solvents/cleaners. Avoid sharp objects and keep heat and hot objects away from all surfaces of Remer Products.